60 Mins Steel Metal 35mm Fire Doors

60 Mins Steel Metal 35mm Fire Doors

35mm fire doors GH ul list Fire Door Features : fire rated up to 3 hours with WHI UL FM label applied . all of fire-doors are designed and fabricated under SDI requirements. 1 3/4" thickness (44.5mm),non-handed assemble with reversible hinge...

60 Mins Steel Metal 35mm fire doors

 steel-fire-door-GF004


 

GH 35mm fire doors features :

fire rated up to 3 hours with WHI  UL  FM label applied .

all of doors are designed and fabricated under SDI requirements.

1 3/4" thickness (44.5mm),non-handed assemble with reversible hinge shim parts.

 

fire rated wire glass or louver option for vision lites .

all materials is  approved  in accordance with NFPA  ASTM and other standards .

steel stiffener, hardware preparations and reinforcement are conformed with ANSI standards .

 

GH 60 mins fire door technical data :

Brand

Golden House (GH)

Standard

UL 10(b),UL 10(c) /NFPA/ASTM /UBC7-2

Certifications

INTERTEK(WHI),FM,UL

Fire rated time

45min,90min,up to 180 min

Door Size (single)

 standard width up to 4'0"(1200mm ) Height  up to 8'0"(2440mm);

customized size is available .

Leaf thickness:1 3/4" standard ( 44.5mm )

Frame jamb depth:100-300mm

Door size (Double)

Maximum size is 8'x8'(2440x2440mm)

Door leaf sheet

20Ga-18Ga (1.0/1.2mm).customized level is available

Door frame sheet

16Ga.(1.5mm) ,customized level is available

Opening

swing /inward or outward

Type

2 panel/6 panel/flush panel/vision lite /louver

Material of leaf and frame

cold roll steel or Galvanized Steel or Galvannealed Steel

Filling material

Honeycomb,Polystyrene,Mineral Fire Board

Surface finish

factory Primer /finsih paint/power coated/wood grain finished 

Color

RAL color system or be customized as well

Application

Suitable for building project,business,home decoration

(Office,hotle,church,home and so on )

Packing

in wooden case or steel pallet package

 

 

detail 3

 

 

detail (4)

detail (5)

detail (6)

detail (7)

 

Fire exit doors are required to be suited for the various type of walls as below :

Frame and Hardware must also carry the appropriate fire label

 

Door fire RatingWall RatingDescription and Use
3 Hour 4 HourThe openings are in wall that separating buildings or dividing a single building into designated fire areas.doors for this openning are required at 3 hours fire rating.
1-1/2 Hour 2 HourOpenings  are used in enclosures of vertical communication or egress through buildings. theste could be stairwells or elevator shafts. They also are in boiler rooms and in exterior walls that have the potential for severe fire exposure from the outside of the building.

3/4 Hour

(45 Minutes)

1 HourFor use on the  openings are in corridors and room partitions. A door with this rating may also be used in the exterior wall which are subject to moderate fire exposure from the outside of the building.

1/3 Hour

(20 Minutes)

1 HourThese openings are in corridors or interior partitions where this fire rating is required .

 

detail (8)

 

 

    UL FIRE DOOR FRAMES

      Frame used in masonry walls maybe used with a maximum 3-hour fire door while frame used in drywall stud walls are intended to be used with a maximum 1-1/2-hour fire door. consulting with your door frame manufacturers listings for fire door frames than can be used in drywall stud walls with a maximum 3-hour ratings.

 

 detail (9)

detail (10)


 

 

Hot Tags: 60 mins steel metal 35mm fire doors, suppliers, manufacturers, wholesale, customized, price, made in China

Previous: Supermarket Commercial Steel USA Standard Ul Fire Rate Door

Next: UL Industrial Domestic Exit Emergency Minaral Fire Doors