What is the difference between a blister door panel and a molded door panel?

Date:Jan 07, 2021

Most of the door panels on the market use plastic door panels and molded door panels. The common point of these two door panels is that they are made by a series of processing using MDF as the base material, but they each have their own advantages and disadvantages. What is the specific difference?

To a certain extent, the quality of the plastic door panel is determined by the quality of the base material MDF. If the blister door panel is made of high-quality density board as the blister board base material, it is not easy to deform, and has good environmental protection performance, fine appearance, wear resistance, scratch resistance, high temperature resistance, and flame retardant performance. The housing becomes a whole, no edge sealing is required, and the problem that the glue may open after the edge sealing is solved for a long time. On the contrary, if the blister board uses a poor quality substrate, the substrate is easy to deform, rough in appearance, and afraid of scratches.

The advantages of molded door panels are rich colors, vivid wood grain, pure monochromatic chroma, no cracking, and no deformation. The disadvantage of molded panels is that they cannot be in contact with or close to high-temperature objects for a long time, and the design body cannot be too long or too large, otherwise it will be easily deformed . Do not smoke in the kitchen. The temperature of the cigarette butt will burn the film on the surface of the board. Molded board selection: the thickness of the film, the thicker film of a good molded board, has certain requirements on the processing technology, the base material is formed after being carved, The thin film is easy to cover completely, and the thick film is difficult to shape, but the thick film is more wear-resistant, and the molded plate integrated cabinet has less chance of thermal expansion and contraction after molding.

The above is some introduction to blister door panels and molded door panels. If you have any questions, please feel free to call our sales manager to answer you.

Previous: Comprehensive analysis of the classification of molded door panels

Next: How to choose the hinge size and style of doors and windows?